Equipment shelves for 19″ cabinets
6 to 200 kg
Fixed, pull-out or with freely adjustable depth: nine shelf types in 27 versions for server and network cabinets — with load capacity, dimensions and catalogue number in RAL 7035 and RAL 9005.
Request a quote Configure a cabinet with accessories



Which shelf for which load?
The first question is not the load capacity but the mounting: a shelf that hangs only on the front profile rails levers the weight over the rail — that is enough for a switch, router or monitor. As soon as the equipment is deep or heavy, the shelf belongs on four profile rails. And for UPS modules, batteries or storage over 150 kg there are heavy-duty shelves that do not hang in the 19″ grid at all but are fixed at the side to additional middle rails.
Shelves on two profile rails
The simplest solution for light equipment: the shelf is bolted only to the front 19″ profile rails and needs no adjustment to the cabinet depth. The 2 U shelves have a reinforced edge and carry 25 kg (fixed) or 20 kg (pull-out); the flat 1 U shelves are intended for small devices and power supplies.



| Version | Height | Usable width | Usable depth | Load capacity* | RAL 7035 | RAL 9005 |
|---|---|---|---|---|---|---|
| II/2U fixed | 2 U | 446 mm | 250 mm | 25 kg | W-SB00-49-05-011 | W-SB00-49-05-161 |
| II/2U fixed | 2 U | 446 mm | 350 mm | 25 kg | W-SB00-49-04-011 | W-SB00-49-04-161 |
| II/2U fixed | 2 U | 446 mm | 450 mm | 25 kg | W-SB00-49-03-011 | W-SB00-49-03-161 |
| II/2U fixed | 2 U | 446 mm | 650 mm | 25 kg | W-SB00-49-01-011 | W-SB00-49-01-161 |
| II/2U pull-out | 2 U | 416 mm | 355 mm | 20 kg | W-5841-14-04-011 | W-5841-14-04-161 |
| II/2U pull-out | 2 U | 416 mm | 455 mm | 20 kg | W-5841-14-02-011 | W-5841-14-02-161 |
| II/2U pull-out | 2 U | 416 mm | 555 mm | 20 kg | W-5841-14-01-011 | W-5841-14-01-161 |
| II/1U fixed | 1 U | 446 mm | 250 mm | 10 kg | W-5714-53-00-011 | W-5714-53-00-161 |
| II/1U fixed | 1 U | 446 mm | 350 mm | 6 kg | W-5714-52-00-011 | W-5714-52-00-161 |
* static distributed load. All shelves made of powder-coated sheet steel, supplied with fixing accessories, packaging unit 1 pc.
Shelves on four profile rails
Here the load rests on four points: at the front on the profile rails, at the rear on length-adjustable brackets that bridge the distance to the rear rail level. As a result, each shelf fits a range of 100 mm rail spacing — if you move your profile rails, you do not have to buy new shelves straight away.
- IS/0.5U fixed — only 22 mm high, 70 kg: the space-saving shelf that does not use up a full rack unit.
- ISU/1U fixed — 120 kg, with cable openings and cable guide rings at the front, in six depths up to 850 mm for cabinets up to 1000 mm deep.
- IR/1U pull-out — 30 kg on pull-out rails, for equipment that has to be accessed from the front for servicing.



IS/0.5U – fixed (H 22 mm, W 450 mm)
| Usable depth T | Adjustment range T1 | Cabinet depth from | Load capacity* | RAL 7035 | RAL 9005 |
|---|---|---|---|---|---|
| 350 mm ✓ | 350–450 mm | 600 mm | 70 kg | W-8264-350-011 | W-8264-350-161 |
| 450 mm | 450–550 mm | 600 mm | 70 kg | W-8264-450-011 | W-8264-450-161 |
| 550 mm ✓ | 550–650 mm | 800 mm | 70 kg | W-8264-550-011 | W-8264-550-161 |
| 650 mm | 650–750 mm | 800 mm | 70 kg | W-8264-650-011 | W-8264-650-161 |
ISU/1U – fixed, with cable openings and cable guide rings (H 44 mm, W 450 mm)
| Usable depth T | Adjustment range T1 | Cabinet depth from | Load capacity* | RAL 7035 | RAL 9005 |
|---|---|---|---|---|---|
| 350 mm ✓ | 350–450 mm | 600 mm | 120 kg | W-5841-20-02-350-011 | W-5841-20-02-350-161 |
| 450 mm | 450–550 mm | 600 mm | 120 kg | W-5841-20-03-450-011 | W-5841-20-03-450-161 |
| 550 mm ✓ | 550–650 mm | 800 mm | 120 kg | W-5841-20-04-550-011 | W-5841-20-04-550-161 |
| 650 mm | 650–750 mm | 800 mm | 120 kg | W-5841-20-05-650-011 | W-5841-20-05-650-161 |
| 750 mm ✓ | 750–850 mm | 1000 mm | 120 kg | W-5841-20-06-750-011 | W-5841-20-06-750-161 |
| 850 mm | 850–950 mm | 1000 mm | 120 kg | W-5841-20-07-850-011 | W-5841-20-07-850-161 |
IR/1U – pull-out (H 44 mm, usable width 414 mm)
| Usable depth T | Adjustment range T1 | Cabinet depth from | Load capacity* | RAL 7035 | RAL 9005 |
|---|---|---|---|---|---|
| 305 mm ✓ | 350–450 mm | 600 mm | 30 kg | W-5841-25-01-350-011 | W-5841-25-01-350-161 |
| 405 mm | 450–550 mm | 600 mm | 30 kg | W-5841-25-02-450-011 | W-5841-25-02-450-161 |
| 505 mm ✓ | 550–650 mm | 800 mm | 30 kg | W-5841-25-03-550-011 | W-5841-25-03-550-161 |
| 605 mm | 650–750 mm | 800 mm | 30 kg | W-5841-25-04-650-011 | W-5841-25-04-650-161 |
* static distributed load. All shelves made of powder-coated sheet steel, supplied with fixing accessories, packaging unit 1 pc. — ✓ = fits ZPAS cabinets with factory setting of the profile rails. T1 = adjustable mounting range of the rear brackets. Brush strips and cable guide rings made of plastic.
Flexible and heavy-duty shelves
The flexible equipment shelf solves a typical problem in existing installations: the profile rails are wherever they are, and no standard shelf fits. Its depth is continuously adjustable — 350 to 600 mm or 500 to 900 mm — and it still carries 150 kg in a single rack unit.
For even more weight there are the heavy-duty shelves for SZB IT and Z-SERVER cabinets 1000 and 1200 mm deep. They do not hang in the 19″ system but are fixed at the side to four profile rails and two special middle rails: fixed up to 200 kg, pull-out up to 140 kg.



| Version | Height | Width | Depth | Load capacity* | RAL 7035 | RAL 9005 |
|---|---|---|---|---|---|---|
| Flexible, adjustable depth | 1 U (44 mm) | 440 mm | 350–600 mm | 150 kg | W-3074-83-04-011 | W-3074-83-04-161 |
| Flexible, adjustable depth | 1 U (44 mm) | 440 mm | 500–900 mm | 150 kg | W-3074-83-00-011 | W-3074-83-00-161 |
| Heavy-duty shelf, fixed | 38 mm | 483 mm | 700 mm | 200 kg | W-5841-06-00-011 | W-5841-06-00-161 |
| Heavy-duty shelf, pull-out | 50 mm (shelf) / 110 mm (rails) | 392 mm | 700 mm | 140 kg | W-5841-08-00-011 | W-5841-08-00-161 |
* static distributed load. All shelves made of powder-coated sheet steel, supplied with fixing accessories, packaging unit 1 pc. Heavy-duty shelves only for cabinets 1000/1200 mm deep, mounted on 4 profile rails + 2 middle rails.
You will find the matching middle rails, support rails and fixing sets under 19″ mounting hardware.
Frequently asked questions
What does the load capacity figure for the equipment shelves mean?
All values are static distributed loads according to the ZPAS catalogue: the weight that may be spread evenly over the installed shelf. For a cabinet that is transported fully fitted, or for point loads, choose the next stronger shelf.
Do the shelves also fit cabinets from other manufacturers?
The shelves on two profile rails fit any 19″ cabinet with a standard hole pattern. For shelves on four profile rails, the distance between the rail levels matters — it must lie within the adjustment range T1. Heavy-duty shelves are matched to the middle rails of the ZPAS SZB IT and Z-SERVER cabinets.
Fixed or pull-out — which makes more sense?
Pull-out shelves are worthwhile for equipment that is serviced regularly from the front or cabled at the rear. They carry less than fixed shelves of the same design (e.g. 20 instead of 25 kg at 2 U, 30 instead of 120 kg at 1 U on four rails).
Can I order the shelves directly with the cabinet?
Yes — equipment shelves can be ordered together with the cabinet in the server rack configurator; the cabinet is then delivered fitted from the factory. To order individually, simply use the catalogue number in the table.
Found the right shelf?
Send us the catalogue number and the quantity — or describe the equipment and the cabinet and we will select the shelf. Quotation within 2 working days at most.